FLEX PRIME - SELF HEALING EPU, WINDSHIELD PROTECTION FILM, 1.65X1.22M WIDTH

FLEX PRIME - SELF HEALING EPU, WINDSHIELD PROTECTIVE FILM, 1.65X1.22M WIDTH, is a film resistant to stone impacts, made from a new generation of high clarity EPU (elastomeric poly-urethane) material, better than those in TPU or PET. The surface of the foil is covered with a special anti-fouling lacquer, with self-regeneration of micro-scratches at 23 - 26 °C, super hydrophobic, oleophobic and on which the wipers slide easily. To the touch, the outer surface of the foil is similar to the surface of the screen of top smartphones.

The film does not require thermoforming upon application. Depending on the environment in which the vehicle is used, the approximate durability is 12 months from the date of installation, with the manufacturer's recommended maintenance. This film is produced in South Korea by INTERCONIX Co.Ltd, ISO9001 and ISO14001 certified.

TECHNICAL DATA

- transparency: 92%

- UV blocked: 99%

- self-regeneration temperature: 23-26 °C

- hydrophobic / oleophobic

- water contact angle: 108-110°

- adhesion force of the adhesive: 700 grf / inch

- foil thickness: 182 µm (7.2MIL)

DURABILITY: 12 months

WARRANTY PERIOD: 6 months

Warranty coverage begins on the date of installation of the FLEX PRIME EPU™ and extends for the period of ownership by the original registered owner of the vehicle. This warranty is not transferable and ends when the vehicle is sold to another owner.

THE WARRANTY REFERES TO:

- peeling off the adhesive from the foil

- delamination of the component layers (not cracking the varnish)

- yellowing

If the product is considered defective, under this warranty, the seller will replace the amount of foil that proved to be defective, but not the replacement labor.

NOT COVERED BY WARRANTY:

The warranty does not cover the repair or replacement of the windshield in the event of breakage, damage, scratches or stains appearing on the surface of the foil, during the entire period of use, or any optical distortions and is not responsible for any damages or fines received due to the legislation of the respective country.

The warranty is void if the product has been subjected to extreme mechanical or chemical abuse, improper care or maintenance, uncontrollable circumstances such as storms, hail, tornadoes, etc., the seller is not responsible for the resulting losses, damages or expenses.

CLEANING AND MAINTENANCE INSTRUCTIONS

To maximize the life of your FLEX PRIME EPU™ windshield film, follow these instructions for proper care and maintenance:

- clean the foil as often as needed with washing solutions that do NOT contain alcohol, ammonia, corrosive substances and solvents, chemical products and caustic materials (including cleaning agents with solvents, such as isopropyl alcohol, or other acidic or corrosive materials.

- for cleaning, use clean and non-abrasive materials

- do not remove snow and ice from the windshield using scrapers or other special tools for this, we recommend removing the ice by heating the windshield

- clean as soon as possible the stains and traces of insects, bird droppings and other hard-to-clean stains, especially during the summer.

- do not use the wipers on a dry windshield

- replace used wipers on time

- do not use windshield fluid based on alcohol, ammonia or chemical solvents

- use windshield fluid that contains ordinary detergent